Hospital Waste Disposal Machine Medical Waste Shredder With Autoclave

China WANROOETECH factory manufacture & supply medical waste shredder with Autoclave，medical waste shredder，medical waste sterilizing shredder，medical waste shredder machine，medical waste autoclave，medical waste recycling machine，medical waste sterilizer，medical waste treatment machine，autoclave sterilization，medical sterilizing machine，hospital waste autoclave，autoclave hospital waste machine For much more info, please visit our website: WeChat ID: WANROOE Whatsapp: 0086-18962233220 Skype:"China.plastic.machine" Email: Info@wanrooe.com Website: https://www.wanrooe.com/ https://www.wanrooetech.com/ https://www.wanrooetech-pulverizer.com/ https://www.wanrooerecycle.com/ https://www.amshredder.com/ https://www.ampelletizer.com/ https://www.timesrecycle.com/ Chinese Website: http://www.China-tireshredder.com Description： MWSS-80 series shredding autoclave for medical waste is newly developed and produced by our company. It is widely used in hospital, clinic, health center and dentists etc. It meets the standard of GB150-2011«Pressure Vessel»and TSG R0004-2009«Pressure Vessel Safety Rules». Shredding, sterilization and drying can be done in one autoclave, thus to avoid second pollution. It saves space. And can greatly reduce costs of packaging, transportation and burying. Technical Advantages： For the convenience of user, this shredding autoclave adopts built-in electric steam generator to produce steam as sterilization medium, automatic water supply and water level protecting system. Feeding port is on the top of the machine with electric sliding door which is easy for loading medical waste. This shredding autoclave can ensure a thorough crushing, sterilization and crying within 90 minutes. Features： 1. Loading: Press the "Open Top Door" button to open the integrated top door. The operator transports the fully loaded turnover box to the operation platform, and manually pours the medical waste in the turnover box into the feed bin of the integrated machine. Closing the top door: When the feeding bin is full, press the button to close the top door, and the top door will be closed. 2. Crushing: After the top door is closed, the crushing motor starts and starts to crush the material. When the set crushing time expires and the current is detected to return to the no-load state, the crushing motor stops working and the crushing is completed. 3. Heating up: After the crushing is over, the vacuum pump works, and the pressure of the inner chamber is pumped to minus 90 Kpa, and the pre-vacuum is over. The steam inlet valve is opened, and steam is fed into the inner chamber. After the temperature detection reaches the sterilization temperature, the program transfers to the sterilization stage. 4. Sterilization: In the sterilization stage, the steam inlet valve is under the dual control of the inner chamber pressure and temperature, so that the inner chamber temperature is controlled within the range of 134 degrees ± 2 degrees. After 45 minutes, the sterilization is over. 5. Vacuum: The vacuum pump is turned on, and the material is dried under slight negative pressure - the end of a certain period of time. 6. Unloading: Open the bottom side motorized door, pull out the receiving car, and pour the material.

Category